110V Magnetic Induction Flameless Heater Kit with Case H834
110V Magnetic Induction Flameless Heater Kit with Case H834
【Main Parameter】Model 110V ,Input voltage 110V 50/60Hz Input current 7A,Output power 500-900W,Output voltage 45V,Output current 180A.Package:HBR Main*1,Flexible Soft Coil*1.1m,18mm coil(diameter of bore)*1（Length 20cm),22mm coil(diameter of bore)*1（Length 20cm),28mm coil(diameter of bore)*1（Length 20cm),screw * 2,Manual * 1
【Features】Flameless Lossless Heating system Green&Safety, 1 minute Removal process/97%Lower power consumption by/1 cent removing 1 bolt only cost you 1 cent/1.9 Kg weight with, adopt heat conduction technology, no flame, safe and environmental protection. It greatly reduces the risk of accidents and potential damage.
【Design】 fastest 60 seconds to 500 degrees centigrade, rapid heating, easy to remove rusty screws with wrench.Do not damage the bolt and the material around the equipment.equipped with two LED lights for narrow and dark space.More coils are available. Each line is suitable for the size of different types of bolts.
【Warning】 Before using, please be sure to read and understand all safety rules and instructions in this manual before operating the heating inductor. Pay particular attention to the safety rules. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
【Aplications】The size of two books. Compared with conventional flame tools, it can save the space division and capital input quick dismantling wire gun. It is not limited to cars, agricultural equipment, ships and tanks. It is very suitable for the maintenance of various machine tools.
General Safety
1. Keep a fire extinguisher or fire blanket alongside at all times when using the heating inductor.
2. Ensure no flammable products are near the work area while using the heating inductor.
3. Do not use the heating inductor within 150mm (6 inches) of any air bag component. The heat created by the heating inductor can ignite the air bag squib propellant causing it to explode without warning.
4. Do not operate the heating inductor while under the influence of drugs, alcohol or any medication.
5. The heating inductor can heat these metallic objects very quickly and cause serious burns or even ignite clothing.
6. Do not use an attachment if the insulation has been breached. They cannot be repaired, only replaced.
7. Ensure the heating inductor is connected to a supply that is adequately earthed. (Grounded)
8. Do not use the heating inductor in the rain, moisture or immersed in water.
Packing List:
HBR Main*1
Flexible Soft Coil*1.1m
18mm coil(diameter of bore)*1（Length 20cm)
22mm coil(diameter of bore)*1（Length 20cm)
28mm coil(diameter of bore)*1（Length 20cm)
screw * 2
Manual * 1
Specification:
Model 110V
Input voltage 110V 50/60Hz
Input current 7A
Output power 500-900W
Output voltage 45V
Output current 180A